Liquid Filter Bag Filter Element
AccuSEP Filter Bag is designed for absolute filtration and its
filtration efficiency is up to 99%. The filtration performance can
rival the same class expensive filter cartridge, and the flowrate
of single Size 2 bag is 7-10 times higher than the 40-inch-length
pleated cartridge. It is also very easy to install and replace. The
optimized gradient filter layer of AccuSEP delivers pre-filtering
function and higher dirty holding capacity and saves filter media
AccuSEP Filter Bag is made of 100% FDA grade polypropylene without
any silicone oil, adhesives or other releasing composition which
may pollute the liquid. The gradient filter layers includes
melt-blown polypropylene pre-filtering layer, multi-layer composite
polypropylene filtration membranes, the external protection layer.
AccuSEP is very good at filtering very small particles and even
soft impurities such as colloforms and organics. The enough depth
space can trap soft impurities in filtration fibers. On the
contrary, soft impurities will paste onto the surface of
conventional filter elements easily and reduce the filter element
service life. And some impurities extrude through the filtration
layer and cause filtration failure. The filter area of AccuSEP is
0.25m2 and 0.5m2 and optional filter media is PB.
LIVIC filter bag includes Depth Filtration Type and Mesh Surface
[Depth Filtration] Filtration layer consists of crossing fine fibers by kind of
froming rules, is good at removing small solid particles and some
soft impurites. It observably clarifies the liquid and is a kind of
disposable filtration media. The depth space has stronger dirty
holding capacity. It applies to liquid filtration of normal and low
viscosity at high filtration ratings.
[Mesh Surface Filtration] Filter layer consists of smooth rigid mesh weaved by monofilament
and the surface mesh is usually
square hole type. It is good to remove larger solid particles.
Particle larger than mesh size will be blocked and particles
smaller than mesh size pass easily. The mesh surface filtration has
the screening function at set. The filter cake on the mesh surface
is easy to strip and clean and the mesh filter media can be reused
for several times after cleaning.
|Material||Polypropylene Needle Felt/Polyester Needle Felt/Nylon Monofilament
Mesh/Polypropylene Multifilament/ Polyester Multifilament|
1#Filter Bag,Φ178mm,Length 419mm
2#Filter Bag,Φ178mm,Length 813mm
4#Filter Bag,Φ102mm,Length 355mm
■ Applicable industries: Fine chemicals, water treatment systems,
plup and paper, automobile manufacturing, petro-chemical,
machining, coatings, electronics etc.
■ Applicable liquids: Wide applicability, all liquids contained